Cellular Phones
Each day something like 30,000 people in the
United States sign up for and start
using a cellular phone. With a cell phone
you can talk to anyone on the planet
from just about anywhere (80% of the
U.S. has coverage). A cell phone is really
an extremely sophisticated radio.
A cell phone is a duplex device which uses one
frequency for talking and a
second, separate frequency, for listening. A cell
phone can communicate on
1,664 channels and operate within cells. They can
switch cells as they move
around. Cells give cell phones incredible range.
Someone using a cell
phone can drive clear across a city and maintain a
conversation the entire
time. The way a cellular phone does this is the carrier
chops up an area
(such as a city) into cells. Each cell is typically sized at
about 10 square
miles (perhaps 3 miles by 3 miles). Cells are normally thought
of as hexagons
on a big hexagonal grid. As you move toward the edge of your
cell, your
cell's base station will note that your signal strength is
diminishing.
Meantime, the base station in the cell you are moving toward, which
is
listening and measuring signal strength on all frequencies, will be able
to
see your phone's signal strength increasing. The two base stations
coordinate
themselves through the MTSO, and at some point your phone gets a
signal on a
control channel telling it to change frequencies. This "handoff"
switches
your phone to the new cell. Roaming makes things a bit more
interesting. In
modern systems, the phones listen for a System ID (SID) on
the control channel
at power-up. If the SID on the control channel does not
match the SID programmed
into the phone, then the phone knows it is
"roaming". The phone also
transmits a registration request and the network
keeps track of your phone's
location in a database. This way the MTSO knows
which cell you are in when it
wants to ring your phone. As you move between
cells, the phone detects changes
in the control channel's strength and
re-registers itself with the new cell when
it changes channels. If the phone
cannot find any control channels to listen to
it knows it is out of range and
displays a "no service" message. Cell
phones suffer from a problem known as
"cloning". When your phone is
"cloned" it means that someone has stolen your
phone's ID numbers and
is able to make fraudulent calls on your account. Here
is how cloning occurs.
When your phone makes a call, it transmits two
pieces of information to the
network at the beginning of the call: - A MIN
(Mobile Identification number) - a
10 digit number derived from your
phone's number (both the MIN and SID are
programmed into the phone by the
dealer) - An ESN (Electronic Serial Number) - a
unique 32-bit number
programmed into the phone when it is manufactured. The MIN/ESN
pair is a
unique tag for your phone, and it is how the phone company knows who
to bill
for the call. When your phone transmits its MIN/ESN pair, it is possible
for
someone to listen, with a scanner, and capture the pair. With the
right
equipment it is fairly easy to modify another phone so that it contains
your
MIN/ESN pair, and now someone else can make calls on your
account.